Differences

This shows you the differences between two versions of the page.

adminhelp:pricingcalculations:discountsmultipliers [2011/04/21 16:03]
aquandt
adminhelp:pricingcalculations:discountsmultipliers [2011/04/21 16:12] (current)
aquandt
Line 1: Line 1:
 +{{indexmenu_n>86}}
 +====== Discounts/Multipliers ======
 +  
 +Multiplier and discount administration allow discounting when a quote is created. In addition to developing pricing rules for configured products, discount and multiplier rules can be created also. These rules can be very specific, down to a particular user and a product, or very generic such as for a particular user group, product category or a product type. Any combination of selections from 5 criteria groups can be used to specify a discount or multiplier. \\ 
 +**Multipliers **and **Discounts **can be used individually or simultaneously.  **Minimum Value**, **Default Value**, and **Maximum Value** can be assigned for each.  The Default Value is used when a user first generates a Quote. \\ 
 +Depending on the Shopping Cart style used (see [[adminhelp:usersadministration:usergroups#Visual Styles|Visual Styles]]), the Default Discount, or Multiplier Value, applied to the Cart Total can be modified.  Users are allowed to enter values that are within the Maximum and Minimum Value range.  If a user enters a value outside of this range, then the Approval Process (see the chapter on [[usersideinformation:approvalprocess|Approval Process Administration]]) is initiated. \\ 
  
 +<note>Default Value is only applied to the Cart the first time that a user generates it. If the Discount or Multiplier is modified then that value is contained as the Discount or Multiplier value. Reopened quotes will have the modified Discount or Multiplier value.</note> 
 +\\ 
 +The Discounts and Multipliers administration can be accessed through the **Discounts/Multipliers** link under **Pricing/Calculations.** \\ 
 +
 +{{ pricingcalculations:discountsmultiplier.jpg }}  
 +;#;//Figure A - Discounts/Multipliers List//;#;
 +\\ 
 +Discounting rules can be **deleted **or **edited **by clicking {{:pricingcalculations:delicon.jpg|}}  or  {{:pricingcalculations:editicon.jpg|}} respectively. Rules can also be searched by entering criteria in the text boxes at the top and clicking the **Search **button on the left.  To add a new rule, click **Add New **at the top of the screen.  This brings up the screen shown below, which is also displayed if a rule is edited.\\ 
 +
 +When adding a new rule, **default discounts and multipliers** are added in order to avoid making a mistake for those users who are not familiar with use of multipliers/discount.  
 +
 +When new rule is being created,
 +
 +  * default discounts is set to 0 for min, max and default
 +  * default multipliers is set to 1 for min, max and default\\
 +
 +{{ pricingcalculations:capture.jpg }}
 +;#;//Figure B - Add New Discount/Multiplier//;#;
 +\\ 
 +Discounting rules can be specified from 5 criteria groups that are shown at the top of the page: 
 +  * User Group 
 +  * User 
 +  * Category 
 +  * Product 
 +  * Product Type \\ 
 +The priorities of these groups are determined by what is set in **Discounting **under the **Discounting Priorities** menu (see [[adminhelp:pricingcalculations:discountpriorities|Discount Priorities]]). Fields displayed to the left have higher priority. For instance, in the examples shown below, User Type has the highest priority. It should also be noted that the labels for each criteria can be changed in Priority Administration. So label names may be different from what is discussed here. \\ 
 +Multiple selections within each group are not allowed though.  Multiple selections across different groups are allowed. When selections are made across different groups, the discount or multiplier is applicable only when all selections are true. Rules can to be created for each individual item in a criteria list if desired. \\ 
 +
 +When check box ‘**Use recurring price and cost**’ has been activated under CPQ Setup -> General -> Application Parameters -> General, fields for ‘Discounts for Recurring Price’ and ‘Multiplier for Recurring Price’ will be added. For more details see [[adminhelp:pricingcalculations:recurring_and_non-recurring_prices]] section.\\
 +
 +**Multipliers **are values such as 0.5, 0.75, etc. that when applied to the list price will represent a percentage of the price, such as 50 or 75. \\ 
 +
 +{{ Wiki::discountsmultipliersb6.png }}
 +;#;//Figure C - Multiplier Fields//;#;
 +\\ 
 +**Discounts**, on the other hand, are values such as 50, 25, etc. that when applied to the list price will represent that percentage taken off of the price. \\ 
 +
 +{{ Wiki::discountsmultipliersb7.png }} 
 +;#;//Figure D - Discount Fields//;#; 
 +\\ 
 +
 +
 +The **Condition **field is used to enter expressions to determine when the rule will run. Any expression entered must resolve to 1. Entering  into the Condition field will make the rule active at all times. \\ 
 +The example above shows a rule that users **Bane Purtic** from the user group **CUSTOMER**, can sell **Personal Printer** from the category **Hardware **using multipliers from 0.5 to 1 and/or discounts from 0 to 50, as long as those products are of product type **Product**. Also, according to the condition statement, this rule will only run when the user’s Zip Code is 53202.\\ 
 +
 +<note>More than one rule can be written for the same product using the same user. When this is the case, the most restrictive rule will be used. This only works, though, when a rule is defined for the product, not for product type.</note> 
 +
 +Conditions can also be entered into the Multiplier or Discount fields to determine the value. In this way, multiple rules do not need to be created for separate values. \\ 
 +
 +{{ Wiki::discountsmultipliersb9.png }}  \\ 
 +;#;//Figure E - Multiplier Fields//;#;
 +\\ 
 +
 +This example shows that the user will have a Minimal Multiplier value of 0.25 and Default value of 0.5. The Maximum value, though, is contingent on the user’s zip code. If their zip code is 53202, then the Maximum value is 1. Otherwise, the Maximum value will be 0.75. \\ 
 +Conditional statements within the Multiplier or Discount fields can be used separately or in conjunction with the Condition field. \\ 
 +
 +<note>For more information on Tags and IF statement expressions see Appendix A.</note>
 +\\ 
 +{{ Wiki::discountsmultipliersb11.png }}  \\ 
 +;#;//Figure F - Override Values//;#; 
 +\\ 
 +The **User can override values? **check box is used to determine whether or not a user can modify the Multiplier or Discount with a value that is out of the Minimal and Maximum value range. When a user attempts to enter a value that is out of that range, a warning is displayed alerting the user that the value is out of range. \\ 
 +If this box is unchecked, the user will be unable to enter the value. If checked, though, the user will be able to enter the value, but the quote is automatically submitted for approval to the user’s approve parent. The Approval Process is then initiated. See the chapter on [[usersideinformation:approvalprocess|Approval Process]] for more information on the Approval Process. \\ 
 +
 +<note>The Approval Process must be set up in order for the User can override values check box to work correctly.</note> 
You are here: SAP Sales Cloud CPQ Online HelpAdmin Page HelpPricing/CalculationsDiscounts/Multipliers